Having made a bit of an error (well fairly major actually ;-) ) with the first door when gluing, basically ending up with a fair curve along its length which I had to spend a lot of time correcting by jigging the whole thing and bending the other way :-( Needless to say I didn't want to make the same mistake again and chose a much better method when glueing - basically clamping the assembly rather than applying weight to it.

I used a couple of joist lengths which are very straight and clamped it all together against these to ensure a straight door. So once the panels were sanded and cleaned using white spirit I applied the PVA to the meeting surfaces and lined the edges up before clamping tight. I left this over night to dry.

Door 2 (outer) glued and jigged